日日噜夜夜草|一级黄色录像高清版|调教白富美加勒比久久|亚洲欧洲精品婷婷|日韩综合无码色色|日韩精品一区妖精视频|亚洲无码中文字幕hd|99亚洲思思丝袜|手机看片国产精品大胆亚洲|成人无码视频一区二区在线播放

罩面板與護墻板經理（石膏板、護墻板與質量控制）
請候選人提交中英文簡歷至https://stackmodular.bamboohr.com/careers/48
只有發布到以上網址的簡歷才會被審核。
Key Responsibilities
主要職責
成功的候選人將負責對進行中的項目罩面板和護墻板運營進行全面審查和日常監督，包括：
1. Shop Drawings & Materials Inspection 1. 施工圖與材料檢查

• Plan Reviews for Technical Accuracy: Critically examine current product assembly drawings, fire-rated wall details, sheathing specifications, and fastener schedules prior to installation to ensure compliance with relevant US/Canadian building codes and manufacturer specifications.
  
• 技術準確性方案審查： 在安裝前，嚴格審查當前的產品裝配圖、防火墻詳圖、護墻板規格和緊固件明細表，以確保符合相關的美國/加拿大建筑規范和制造商規格。
  
• Plan Reviews for Product Alignment and Accuracy: Evaluate and review boarding and sheathing shop drawings for completeness and conformance to the approved modular designs issued for production.
  
• 產品一致性與準確性方案審查： 評估和審查罩面板和護墻板施工圖的完整性，確保其符合批準用于生產的模塊化設計。
• Must have experience redlining and reviewing finish and assembly shop drawings.
• 必須具有批注和審查飾面及裝配施工圖的經驗。
• Verification Raw Material Inspection: Assist in the quality inspection of incoming materials, including drywall sheets, joint compound (mud), sheathing panels, fasteners, and insulation to ensure correct type, thickness, and condition.
• 驗證性原材料檢驗： 協助對進廠材料進行質量檢驗，包括石膏板、接縫化合物（膩?zhàn)樱?、護墻板、緊固件和保溫材料，以確保類型、厚度和狀況正確。

2. Process Optimization & Training 2. 流程優化與培訓

• Process Mapping: Review and revise the current workflow for interior drywall installation, taping/mudding, exterior sheathing application, and quality control.
• 流程梳理： 審查和修訂當前室內石膏板安裝、嵌縫/抹灰、室外護墻板應用和質量控制的工作流程。
• Suggest improvements or efficiencies where necessary, focusing on reducing seams/cracks, minimizing finish defects, and optimizing material waste.
• 在必要時提出改進或提高效率的建議，重點關注減少接縫/裂縫、最大限度地減少飾面缺陷和優化材料浪費。
• Techniques & Equipment: Evaluate existing tools, lifting equipment, measurement devices, and worker techniques in use for cutting, fitting, fastening, and finishing (e.g., mud application, sanding).
• 技術與設備： 評估用于切割、安裝、緊固和飾面（例如，膩?zhàn)油磕?、打磨）的現有工具、起重設備、測量設備和工人技術。
• Recommend specific upgrades, additions, training, or modifications to improve process efficiency and finish consistency.
• 推薦特定的升級、增補、培訓或修改，以提高流程效率和飾面一致性。
• Training and Mentorship: Lead hands-on and classroom training sessions for the boarding teams on code requirements for fire and sound assemblies, proper fastening patterns, mudding techniques (level 4 and level 5 finish), and quality standards.
• 培訓與指導： 為罩面板團隊主導關于防火和隔音組件的規范要求、正確的緊固方式、抹灰技術（4 級和 5 級飾面）和質量標準的實踐操作及課堂培訓課程。

3. Quality Assurance & Standards Development 3. 質量保證與標準制定

• Quality Control (QC) Program: Review and enhance the current QC Inspection and Testing Plans, project quality criteria, and quality control documentation processes for boarding and finishing.
• 質量控制 (QC) 計劃： 審查和加強當前的 QC 檢查和測試計劃、項目質量標準以及罩面板和飾面質量控制文件流程。
• This must include fastener embedment checks, joint taping coverage, finish level verification, and dimensional tolerance checks.
• 必須包括緊固件嵌入檢查、接縫帶覆蓋、飾面等級驗證和尺寸公差檢查。
• Defect Root Cause Analysis: Identify and troubleshoot common boarding defects such as cracking, nail pops, sagging, or finish inconsistencies, and develop preventative measures or appropriate repair/rework procedures.
• 缺陷根本原因分析： 識別和排除常見的罩面板缺陷，如開裂、釘子彈出、下陷或飾面不一致，并制定預防措施或適當?shù)木S修/返工程序。
• Standard Operating Procedures (SOPs): Develop clear, visual, and concise SOPs for all critical steps in drywall, sheathing, insulation, and joint finishing/taping where these SOPs don’t already exist in the company system.
• 標準操作程序 (SOP)： 針對石膏板、護墻板、保溫材料和接縫飾面/嵌縫中的所有關鍵步驟，在公司系統尚不存在SOP的地方，制定清晰、可視化和簡潔的SOP。

Qualifications
資格要求

• Experience: A minimum of 3 years of hands-on experience in commercial or multi-family residential drywall, sheathing, or interior finishing, with a focus on high-volume production or new construction.
• 經驗： 至少 3 年商業或多戶住宅的石膏板、護墻板或室內飾面實踐經驗，重點是大規模生產或新建項目。
  
• Technical Expertise:
  
  • Deep knowledge of governing US/Canadian building codes and standards related to drywall (gypsum board) installation, fire-rated assemblies, and interior finish tolerances.
  • 深入了解與石膏板安裝、防火組件和室內飾面公差相關的美國/加拿大現行建筑規范和標準。
  • Professional certification or proven expertise in construction quality inspection or finishing trades is highly sought after.
  • 在建筑質量檢驗或飾面行業擁有專業認證或已證實的專業知識將獲高度青睞。
  • Experience or qualification with ASTM C840, ASTM C1396, or ISO quality standards will be strongly considered.
  • 具備 ASTM C840、ASTM C1396 或 ISO 質量標準的經驗或資格將獲重點考慮。
  • Comprehensive understanding of various finish levels (Level 4, Level 5), acoustic assemblies, and vapor/air barrier application.
  • 全面了解各種飾面等級（4 級、5 級）、隔音組件和蒸汽/空氣屏障的應用。
• 技術專長：
  
• Modular/Factory Experience (Preferred): Experience working on modular, prefabricated, or production-line construction projects is a significant asset.
  
• 模塊化/工廠經驗（優先）： 具備模塊化、預制或流水線建設項目的工作經驗者優先。
  
• Training & Communication: Proven ability to effectively train, mentor, and communicate technical information to diverse multi-lingual teams.
  
• 培訓與溝通： 已證實的能夠向多元化的多語言團隊有效培訓、指導和傳達技術信息。
  
• Physical Requirements: Ability to be on a factory floor for extended periods, including climbing stairs/ladders and withstanding production-line environments as required.
  
• 身體要求： 能夠長時間在工廠車間工作，包括根據需要爬樓梯/梯子并承受流水線環境。
  
• Technological Capacity: Must have some experience with mobile phones and tablets and be able to contribute to the digital record-keeping systems in place at the company.
  
• 技術能力： 必須具備使用手機和平板電腦的經驗，并能為公司現有的數字記錄保存系統做出貢獻。

Compensation and Logistics
薪酬與后勤

• Contract Duration: 1 year.
• 合同期限： 1 年。
• Compensation: Competitive salary commensurate with experience and expertise.
• 薪酬： 提供與經驗和專業知識相匹配的有競爭力的薪水。
• Logistics: All travel, accommodations, and work-related expenses will be covered by the company.
• 后勤： 所有差旅、住宿和工作相關費用將由公司承擔。